The part is perfect and beautiful! - I am very happy :-) Perfect fit!
The tenon is about 0.3mm too narrow, resulting a poor fit over the holding ring. The bottom of the tenon fall off the mortise on the holding ring for about 1.6mm. The cut out on the other end for the ...
I sourced these bus bars from a couple of different vendors, and PCBWAY got both the dimensions correct and made sure the PEM nuts were pressed flush into the metal. Other places got my order wrong; I...
good quality and fast turn around
Good
Great as always
looks fine
These were 3d panels to test fit the aluminum panels for my home brew ZX81 case. everything was perfect!
I liked the build quality that you produced. There were some warps in the frame but overall it was good and it seems like the holes line up and that the other components fit together as expected.
Just what I wanted with good fast service as always.
Very well printed, only took 2 weeks from purchase to delivery. Will definitely consider using this service again in the future.
Nice quality, very small part, but printed surprisingly well
To tolerance and works great in my application, looking forward to ordering these again
Generally, there were no problems. All shapes appear to have been processed as per the 3D data.