UNITED STATES OF AMERICA
Powder coating involves spraying a powder coating material, primarily composed of resins/polymers, which broadly falls under the plastics category. The powder used is officially called powder coating and is mainly divided into two categories: thermosetting and thermoplastic. About 90% of the market uses thermosetting powders because they generally offer better adhesion, mechanical strength, and corrosion resistance.

A1: Yes, and there is more than one. Major base resins can be formulated for both thermoset engineering plastics and powder coatings:
Epoxy (EP): Cross-links with curing agents. It is used for structural parts like electronic encapsulation and composites, as well as a base resin for powder coatings.
Polyurethane (PU): Vinyl-functionalized PU resins are used in powder coatings and are also suitable for engineering fields like automotive parts and aerospace composite structural components.
Unsaturated Polyester (UP / FRP): It is inherently the base resin for composite materials like fiberglass reinforced plastic (FRP).
Phenolic (PF / Bakelite): Known for excellent insulation properties, commercial phenolic resin products are explicitly used in powder coating formulations.

A2: Yes, for a general, everyday understanding, that is accurate: it means spraying plastic in powder form and baking it into a plastic shell. It is a powdered polymer resin, not liquid plastic, nor is it ordinary plastic bottles ground into powder and sprayed directly. After spraying, it is baked at high temperatures. The powder first melts and levels out, then undergoes chemical cross-linking, finally becoming a thermoset plastic/resin coating. Unlike standard thermoplastics (like PE or PP) that can melt again when heated, powder coating is generally insoluble and infusible after curing—acting more like a hard "thermoset plastic shell."
A3: It is very common. A matte finish isn't a different type of plastic; it is about creating a "frosted glass" effect on the surface. Gloss comes from specular reflection: the smoother the surface, the more uniformly light reflects, making it look brighter. The more microscopically rough the surface, the more light scatters, resulting in a matte look. There are a few main methods:
Adding matting agents/powders: Such as silica, waxes, or organic matting agents. They create micro-irregularities or micro-crystals on the surface, causing light to scatter instead of reflect.
Chemical matting: Using matting curing agents in the powder formula, or dry-blending two powders with different reaction speeds. During baking, varying cross-linking speeds and shrinkage create microscopic unevenness or micro-phase separation, reducing gloss. The resin still cross-links, but the network is uneven, making the surface microscopically "rough."
Adding texturing agents: These additives create regular or irregular textures like sand or wrinkles. The more pronounced the texture, the more light scatters, making it look matte. It is like applying a frosted or leather texture to a plastic shell—the plastic hasn't changed, just its surface structure.
Adjusting leveling agents and curing conditions: Using less leveling agent or controlling baking temperature and time can lead to insufficient leveling. The surface retains microscopic roughness, naturally lowering gloss.
A4: Because the spray gun forces an electrostatic charge onto the powder, and the workpiece is grounded, essentially creating an "electrostatic magnet." The powder is pulled by the electric field, and upon contact, is held by induced opposite charges until it melts and cures in the oven.

The process works in a few steps:
Powder charging: A high-voltage electrode (tens of kilovolts) at the gun tip creates a corona discharge, ionizing the air. As powder exits the gun, particles pick up ions and become charged. Friction guns also charge powder through triboelectric charging (like rubbing a balloon on hair).
Grounding and electric field: The workpiece is grounded (near-zero potential). The high-voltage gun creates a strong electric field between the gun and the part. Charged powder entering this field is pushed toward the part by Coulomb force.
Adhesion after contact: Charged powder near a grounded metal part induces an opposite charge on the surface, attracting each other like magnets. Crucially, powder coating is an insulating polymer resin, so the charge doesn't dissipate easily, allowing it to stay attracted. If the powder were too conductive, the charge would vanish instantly, and it wouldn't stick.
Size and gravity: Powder particles are typically tens of microns, meaning they have low mass but a relatively high charge. The Coulomb force is sufficient to overcome gravity, making them fly to the part and stick without falling off easily.
Baking and final bonding: In the oven, the powder melts, levels, and cross-links. The charge gradually leaks or neutralizes at high temperatures, but the coating wets and cures onto the surface. The final adhesion relies on mechanical interlocking, chemical bonds, and intermolecular forces—not static electricity.