#1000 sanding | Surface Finishes for Metal and Plastic Parts

#1000 sanding

Description

Sanding is the use of fine abrasive sand particles to rub the surface of the product to produce a diffuse, non-linear texture effect. Adhere different abrasive grit to the backing paper or the back of the board, and the abrasive grit can be distinguished by different granularities according to the size: the higher the particle size, the finer the abrasive grit, so the surface effect is better.

Technical properties


Sharp edges and burrs	Removed
Premium appearance availability	Yes
Tolerances	Met after surface finish

Colors

Applicable to all pantone colors

Applicable Materials

ABS

Alloy steel

Aluminum

Bakelite

Brass

Copper

FR4

Mild steel

Nylon

PEEK

PMMA (Acrylic)

Polycarbonate (PC)

Polyethylene (PE)

Polypropylene (PP)

Polystyrene (PS)

POM

PTFE (Teflon)

PVC

Resin

Rubber

Spring steel

Stainless steel

Titanium

Tool steel

TPU

Example of an #1000 sanding part

Design considerations for #1000 sanding

Wear appropriate safety equipment, including goggles and a dust mask, to protect yourself from flying debris and dust generated during the sanding process.
Ensure that the material being sanded is compatible with the sandpaper being used. Different materials may require different types of sandpaper or grit sizes.
Ensure that the surface is properly cleaned and prepared before sanding to ensure that the sandpaper can effectively remove any roughness or imperfections.
Inspect the surface after sanding to ensure that it meets the desired specifications for smoothness and texture.
Depending on the application, the surface may need to be treated with a coating, paint, or other surface treatment process to further enhance its properties.

The Justway #1000 sanding process

#1000 sanding is suitable for a range of materials, including metals, plastics, and wood, and is ideal for applications where a high-quality finish is required. Let’s break down the basic steps for #1000 sanding a part:

The surface is cleaned and prepared to ensure that it is free of dirt, oil, and other contaminants that could affect the sanding process.
The surface is sanded using a sandpaper with a grit size of #1000
The surface is inspected to ensure that it meets the desired specifications for smoothness and texture